Please wait a minute...
吉林化工学院学报, 2025, 42(11): 12-18     https://doi.org/10.16039/j.cnki.cn22-1249.2025.11.03
  本期目录 | 过刊浏览 | 高级检索 |
质子交换膜燃料电池交错变径式平行流场结构的数值模拟
张新峰,田爱华*,张可涵,张振东,张福城
(吉林化工学院 机电工程学院,吉林 吉林 132022)
Numerical Simulation of Staggered Variable-diameter Flow Field Structure of Proton Exchange Membrane Fuel Cell
ZHANG Xinfeng, TIAN Aihua*, ZHANG Kehan, ZHANG Zhendong , ZHANG Fucheng
(School of Mechanical and Electrical Engineering, Jilin Institute of Chemical Technology,Jilin City 132022, China)
下载:  PDF (4782KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 为研究交错变径式平行流场结构对质子交换膜燃料电池输出性能的影响,采用计算流体力学软件COMSOL Multiphysics对不同模拟方案进行了对比分析,研究了节流宽度和节流长度比对燃料电池内部传质和输出性能的影响。研究结果表明,适当的节流宽度和节流长度比,可显著提升氧气浓度分布的均匀性,使电池输出性能提高的同时除水性能得到增强。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
张新峰
田爱华
张可涵
张振东
张福城
关键词:     质子交换膜燃料电池      流场结构      节流宽度      节流长度比
    
Abstract: Different types of staggered variable-diameter flow field structure have been analyzed by computational fluid dynamics software COMSOL Multiphysics to investigate the effects of throttling width and throttling length ratio on mass transfer and performance of proton exchange membrane fuel cell. The results show that proper throttling width and throttling length ratio can significantly improve uniformity of oxygen concentration distribution which results in an improved output performance, and the water removal is enhanced as well.

Key words:  PEMFC          flow field structure          throttling width          throttling length ratio
               出版日期:  2025-11-25      发布日期:  2026-03-13      整期出版日期:  2025-11-25
ZTFLH:  TM911.4  
引用本文:    
张新峰, 田爱华, 张可涵, 张振东, 张福城. 质子交换膜燃料电池交错变径式平行流场结构的数值模拟[J]. 吉林化工学院学报, 2025, 42(11): 12-18.
ZHANG Xinfeng, TIAN Aihua, ZHANG Kehan, ZHANG Zhendong , ZHANG Fucheng. Numerical Simulation of Staggered Variable-diameter Flow Field Structure of Proton Exchange Membrane Fuel Cell. Journal of Jilin Institute of Chemical Technology, 2025, 42(11): 12-18.
链接本文:  
https://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2025.11.03  或          https://xuebao.jlict.edu.cn/CN/Y2025/V42/I11/12
[1] 刘伶, 关昶. 探究多孔碳制备工艺的研究[J]. 吉林化工学院学报, 2025, 42(9): 15-18.
[2] 薛冬梅, 王惠燕. 基于统计分析方法的广西各市营商环境综合评价分析[J]. 吉林化工学院学报, 2025, 42(9): 75-79.
[3] 李思瑶. 一种加约束的零攻角飞行器再入与龙格库塔并行计算算法[J]. 吉林化工学院学报, 2025, 42(9): 67-74.
[4] 张军, 白素丹, 尤涛, 韩波, 魏子瑄, 辛瑞昊, 冯欣. 基于多组学融合的乳腺癌风险预测模型[J]. 吉林化工学院学报, 2025, 42(9): 19-24.
[5] 徐洪宇, 李飞, 张京京. “新工科+工程认证”背景下食品工程原理教学改革及课程群体系的构建#br#[J]. 吉林化工学院学报, 2025, 42(8): 43-46.
[6] 佟亮亮, 李林益, 孙婉婷, 霍明楠, 陈圆圆. 高校易制毒化学品管理模式的探索与研究[J]. 吉林化工学院学报, 2025, 42(8): 35-38.
[7] 郭弘, 李冬梅, 金彦彤. 中国传统文化融入双创教育课程的价值观引领研究[J]. 吉林化工学院学报, 2025, 42(8): 55-59.
[8] 徐玉东. 赛训结合项目驱动式教学模式的研究与实践[J]. 吉林化工学院学报, 2025, 42(8): 12-15.
[9] 邹继颖 刘 辉 魏思扬 李超. 方高校虚拟仿真实验教学体系研究—以《环境监测实验》为例[J]. 吉林化工学院学报, 2025, 42(8): 1-5.
[10] 史凤波. 信息化背景下计算机应用基础课程教学研究与实践[J]. 吉林化工学院学报, 2025, 42(8): 30-34.
[11] 苏吉益. 高质量本科层次职业教育发展的机制研究#br# #br#[J]. 吉林化工学院学报, 2025, 42(8): 47-50.
[12] 周清纯, 袁媛. 生态翻译学“三维”转换视角下鼓浪屿景区导览牌英译本翻译策略研究[J]. 吉林化工学院学报, 2025, 42(8): 51-54.
[13] 向东, 刘玉艳. 论教育伦理学视域下的教师师德[J]. 吉林化工学院学报, 2025, 42(8): 65-69.
[14] 刘巧莉 . 地方红色资源融入高校思政课的价值、困境与路径[J]. 吉林化工学院学报, 2025, 42(8): 60-64.
[15] 杨戴竹. 学术文化与研究生教育关系的研究[J]. 吉林化工学院学报, 2025, 42(8): 26-29.
[1] WANG Ya-hong, JIA Ying-chao. Optimization for Soxhlet Extraction of Total Flavonoids from Eggplant Root by Using Response Surface Methodology[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 1 -6 .
[2] PAN Hong-wei, ZHOU Hong-li. Research Progress on Extraction Technology and Component Analysis of Volatile Flavor Compounds in Plants[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 7 -10 .
[3] YAN Zhen-han, CHEN Qing. Analysis of Pressure Sealing Technology Research[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 11 -14 .
[4] SUN Xiao-feng, YU Wen-xin, ZHU Ming-wei, JIE Meng, JIANG De-lon. Research on the Piezoelectric Pump Application in Continuous Ink Supply System of the Inkjet Printer[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 15 -18 .
[5] LV Xue-fei, LIU Shuang, GAN Shu-kun. New Technology of Compound Rare Earth Salt Conversion on Copper Alloy Surface[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 19 -22 .
[6] SONG Qi, LIU Peng, CHEN X, LIU Tong. Mechanical Structure Design of the Chocolate 3D Printer[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 23 -26 .
[7] HAN Jie, WANG Kai-bao, ZHOU Zhen-qiang, LIU Yu-li, SONG Chun-lei, QIN Qing-kun. Design and Modal Analysis of Ozone Disinfection Cleaning Machine for Fruits and Vegetables[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 27 -30 .
[8] ZHOU Zhen-qiang, WANG Kai-bao, CHEN Yu-tian, HAN Ji, HOU Dai-bing, GUO Wen-qi. Analysis of the Design and Dynamic Characteristics of Recyclable Garbage Crushing Device[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 31 -35 .
[9] LIU Hong-bo, LIU Qi. Experimental Study on Pneumatic Space Bending Flexible Joint[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 36 -39 .
[10] ZHU Qi-rui, ZHANG Yu-feng, LI Yang-xin, WU Dong-jun, BI Shuai-nan, ZHOU Rui-jie, YOU Sai-sai. The Structural Design and Parameter Analysis of the Chair Structure of Quadriplegia of Cerebral Palsy[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 40 -44 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed