小鼠股骨远端缺损植入模型的构建

doi:10.16039/j.cnki.cn22-1249.2020.03.008

下载:

PDF (5732KB)
输出: BibTeX | EndNote (RIS)

摘要

目的：构建小鼠股骨远端骨缺损植入模型。方法：8周龄雌性C57BL /6J小鼠股骨远端钻开1mm直径的孔洞；将直径为1mm、长度为5mm的磺化聚醚醚酮植入小鼠股骨骨髓腔内；观察小鼠术后运动情况；术后2周，取材观察植入材料位置；使用micro-CT扫描三维重建小鼠骨微结构。结果：小鼠术后腿部行动自由，健康状况良好且存活至取材，取材后观察植入材料无松动脱出，股骨干完好未见缺损；micro-CT三维重建结果显示植入物位置正确。结论：使用该方法可成功构建小鼠股骨远端缺损模型。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	孙莹霄
	廖赟
	欧阳丽萍
	宋文刚

关键词: 股骨植入模型骨缺损聚醚醚酮

Abstract:

Objective: Establishing a mouse femur bone defection model. Methods: Three 8-week-old female C57BL /6J mouse were used in this experiment. A hole with 1mm diameter was drilled on the distal femur. Then, the sulfonated polyetheretherketone(PEEK) with 1 mm diameter and 5 mm length was implanted into the femur marrow cavity. Micro-CT was used to reconstruct the bone microstructure and observe the implant position. Results: The health condition of mice with bone defection is good post-surgery and can survive until sacrifice. The movement of them is unlimited. The photos show that the implantation is fine placed in the femur marrow cavity. There is not any obvious damage. 3D reconstructed micro-CT images show that the position of implantation is fine. Conclusion: The mouse femur defection model was successfully established in this work.

Key words: femur implant model bone defect PEEK

出版日期: 2020-03-25 发布日期: 2020-03-25 整期出版日期: 2020-03-25

ZTFLH:

R683.42

引用本文:

孙莹霄, 廖赟, 欧阳丽萍, 宋文刚. 小鼠股骨远端缺损植入模型的构建 [J]. 吉林化工学院学报, 2020, 37(3): 38-42.
SUN Yingxiao, LIAO Yun, OUYANY Liping, SONG Wengang. Establishment of An Implant Defection Model in Mouse Femur . Journal of Jilin Institute of Chemical Technology, 2020, 37(3): 38-42.

链接本文:

http://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2020.03.008 或 http://xuebao.jlict.edu.cn/CN/Y2020/V37/I3/38

[1]	ZHANG Jian, ZHAO Xiang, QU Bo, WU Qi, LIU Yu-tong, LI Yu-shi, LIU Qun. Application of Phosphorus-sulfur-nitrogen Composite Flame Retardant in Cotton Fabric [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 4 -7 .
[2]	YANG Yan-jun, WANG Ya-hong, Yang Xiu-dong. Process Aptimization of Surfactant Assisted Extraction of Total Polyphenols from Kyllinga Brevifolia Rottb [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 11 -15 .
[3]	JIA Shuang-lin, WEI Li-zhi, CHEN Chen, QIAO Hou-dong, LI Hao-ran. Structure Design of Spoon Wheel Planter and Analysis of Seeds Force [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 41 -45 .
[4]	Dou He-yang, LI Ying-hua, Zou Ji-ying. Research Development of Removal of Zn²⁺ in Water Body [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 80 -83 .
[5]	WANG Jian-hui, XIN Si-yu, LIN Shuang, SUN Feng, ZHANG Mi-na, ZHAO Xin. Application Status of Storm Management Model SWMM [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 84 -87 .
[6]	. [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(10): 0 .
[7]	JIN Cheng-zhe, LIU Shu-min. Exploration of the Development of Ice & Snow Sports Industry in Jilin Province in the New Era [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(10): 1 -5 .
[8]	LIU Gang, HAN Li-zhu. Research on Development of Intellectual Property Integration of Ha-Chang Urban Agglomeration from the Perspective of Strategic Alliances [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(10): 6 -11 .
[9]	KANG Cui-yu. Research on Early Warning of Financial Risk and Prevention and Control Strategy of P2P Supply Chain [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(10): 12 -15 .
[10]	LI Gui-juan, ZHAO Wan-yi. Analysis of the Current Situation of Contemporary Youth' Cultural Confidence and Its Construction Path [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(10): 16 -19 .