小鼠股骨远端缺损植入模型的构建

doi:10.16039/j.cnki.cn22-1249.2020.03.008

下载:

PDF (5732KB)
输出: BibTeX | EndNote (RIS)

摘要

目的：构建小鼠股骨远端骨缺损植入模型。方法：8周龄雌性C57BL /6J小鼠股骨远端钻开1mm直径的孔洞；将直径为1mm、长度为5mm的磺化聚醚醚酮植入小鼠股骨骨髓腔内；观察小鼠术后运动情况；术后2周，取材观察植入材料位置；使用micro-CT扫描三维重建小鼠骨微结构。结果：小鼠术后腿部行动自由，健康状况良好且存活至取材，取材后观察植入材料无松动脱出，股骨干完好未见缺损；micro-CT三维重建结果显示植入物位置正确。结论：使用该方法可成功构建小鼠股骨远端缺损模型。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	孙莹霄
	廖赟
	欧阳丽萍
	宋文刚

关键词: 股骨植入模型骨缺损聚醚醚酮

Abstract:

Objective: Establishing a mouse femur bone defection model. Methods: Three 8-week-old female C57BL /6J mouse were used in this experiment. A hole with 1mm diameter was drilled on the distal femur. Then, the sulfonated polyetheretherketone(PEEK) with 1 mm diameter and 5 mm length was implanted into the femur marrow cavity. Micro-CT was used to reconstruct the bone microstructure and observe the implant position. Results: The health condition of mice with bone defection is good post-surgery and can survive until sacrifice. The movement of them is unlimited. The photos show that the implantation is fine placed in the femur marrow cavity. There is not any obvious damage. 3D reconstructed micro-CT images show that the position of implantation is fine. Conclusion: The mouse femur defection model was successfully established in this work.

Key words: femur implant model bone defect PEEK

出版日期: 2020-03-25 发布日期: 2020-03-25 整期出版日期: 2020-03-25

R683.42

引用本文:

孙莹霄, 廖赟, 欧阳丽萍, 宋文刚. 小鼠股骨远端缺损植入模型的构建 [J]. 吉林化工学院学报, 2020, 37(3): 38-42.
SUN Yingxiao, LIAO Yun, OUYANY Liping, SONG Wengang. Establishment of An Implant Defection Model in Mouse Femur . Journal of Jilin Institute of Chemical Technology, 2020, 37(3): 38-42.

链接本文:

https://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2020.03.008 或 https://xuebao.jlict.edu.cn/CN/Y2020/V37/I3/38

[1]	WANG Ya-hong, JIA Ying-chao. Optimization for Soxhlet Extraction of Total Flavonoids from Eggplant Root by Using Response Surface Methodology[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 1 -6 .
[2]	PAN Hong-wei, ZHOU Hong-li. Research Progress on Extraction Technology and Component Analysis of Volatile Flavor Compounds in Plants[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 7 -10 .
[3]	ZHOU Zhen-qiang, WANG Kai-bao, CHEN Yu-tian, HAN Ji, HOU Dai-bing, GUO Wen-qi. Analysis of the Design and Dynamic Characteristics of Recyclable Garbage Crushing Device[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 31 -35 .
[4]	ZHU Qi-rui, ZHANG Yu-feng, LI Yang-xin, WU Dong-jun, BI Shuai-nan, ZHOU Rui-jie, YOU Sai-sai. The Structural Design and Parameter Analysis of the Chair Structure of Quadriplegia of Cerebral Palsy[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 40 -44 .
[5]	ZHANG Yun-peng. Preparation and Characterization of Er³⁺，Y³⁺，Yb³⁺ Co-doped Al₂O₃ Luminescence Materials[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 58 -63 .
[6]	MI Ya-wei. Proof of the Manifold of n Manifold[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 64 -66 .
[7]	XU You-zhuan, ZHOU Hou-qing. The Lower Bounds of Energy for Some Circulant Graph[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 67 -72 .
[8]	ZHOU Hong-li, ZHANG Yang, CUI Hao, XUE Jian-fei. Primary Exploration of the Applied Pharmaceutical Talents Training in Ordinary Engineering Colleges Based on Social Needs and R ecruitment Drives[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 1 -4 .
[9]	YANG Xiu-dong, WANG Ya-hong, ZHANG Pin-mei, YANG Yan-jun, CUI Hao, ZHOU Hong-li. Discussion on the Practice Teaching Reform of Pharmaceutical Engineering Based on Engineering Education Professional Accreditation[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 5 -7 .
[10]	LI Long, WANG Xue-mei. Research on Higher Education Assessment Mode Based on Formative Evaluation and Information Entropy Theory[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 8 -12 .