即时通信网络中路由节点覆盖控制优化方法

doi:10.16039/j.cnki.cn22-1249.2021.05.004

下载:

PDF (1403KB)
输出: BibTeX | EndNote (RIS)

摘要

目前即时通信网络在覆盖路由节点时，出现即时通信网络中路由节点连通性不佳，导致网络中路由节点运行能量消耗过快，为此提出即时通信网络中路由节点覆盖控制优化方法。分析路由节点在传播数据过程中，产生的损耗，确定路由节点的位置；将网络平均划分区域，均匀部署锚节点，计算路由节点之间的最优距离，在即时通信网络中覆盖路由节点；计算路由节点的覆盖率和连通性，确定路由节点覆盖面积，优化路由节点覆盖控制。实验结果显示，在同一参数下，检测路由节点的活跃节点数量和网络中剩余能量时，此次研究的路由节点覆盖控制优化方法，路由节点的活跃数量多，网络中路由节点运行能量足以支撑网络运行，且还具有残存能量。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	安华萍
	李龙亮

关键词: 即时通信网络路由节点覆盖控制优化

Abstract:

At present, when the instant communication network covers the routing nodes, the poor connectivity of the routing nodes in the instant communication network results in the excessive energy consumption of the routing nodes in the network. Therefore, the optimization method of the routing node coverage control in the instant communication network is proposed. This paper analyzes the losses of routing nodes in the process of data transmission, determines the location of routing nodes; evenly divides the network into regions, evenly deploys anchor nodes, calculates the optimal distance between routing nodes, and covers routing nodes in the instant communication network; calculates the coverage and connectivity of routing nodes, determines the coverage area of routing nodes, and optimizes the coverage control of routing nodes. The experimental results show that, under the same parameters, when detecting the number of active nodes and the remaining energy in the network, the optimization method of routing node coverage control in this study, the number of active nodes in the network is large, and the running energy of the nodes in the network is enough to support the operation of the network, and also has the remaining energy.

Key words: instant messaging network routing node coverage control optimization

出版日期: 2021-05-25 发布日期: 2021-05-25 整期出版日期: 2021-05-25

ZTFLH:

TP393

引用本文:

安华萍, 李龙亮. 即时通信网络中路由节点覆盖控制优化方法 [J]. 吉林化工学院学报, 2021, 38(5): 17-22.
AN Huaping, LI Longliang. Optimization Method of Routing Node Coverage Control in Instant Messaging Network . Journal of Jilin Institute of Chemical Technology, 2021, 38(5): 17-22.

链接本文:

http://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2021.05.004 或 http://xuebao.jlict.edu.cn/CN/Y2021/V38/I5/17

[1]	ZHOU Hong-li, ZHANG Yang, CUI Hao, XUE Jian-fei. xploration of Teaching Reform for Biopharmaceutical Engineering Specialty in the Context of Ordinary Colleges' Transformation[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(6): 5 -7 .
[2]	. [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(7): 0 .
[3]	Qu Yongyin, Ai Xuezhong, Gao Xingquan, Liu Qi. Development of Industrial Robots and Construction Thoughts of Integrated Training System in Local Engineering College[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(7): 1 -7 .
[4]	LI Qi, CHEN Ling-ling. Design of Virtual Signal and System Experiment Platform Based on LabVIEW[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(8): 36 -44 .
[5]	. [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 0 .
[6]	ZHANG Jian, ZHAO Xiang, QU Bo, WU Qi, LIU Yu-tong, LI Yu-shi, LIU Qun. Application of Phosphorus-sulfur-nitrogen Composite Flame Retardant in Cotton Fabric [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 4 -7 .
[7]	WU Ping, REN Hong, LU Fei, WEI Qingling. A Functional Material on Recognition of Zn(II) ions based on the New Azo Compound [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 8 -10 .
[8]	YANG Yan-jun, WANG Ya-hong, Yang Xiu-dong. Process Aptimization of Surfactant Assisted Extraction of Total Polyphenols from Kyllinga Brevifolia Rottb [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 11 -15 .
[9]	LIU Qi, XU Bin, LIU Xiao-min, JIANG Xu. Six-dimensional Force Sensor Calibration and its Application in Pneumatic Flexible Finger [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 52 -53 .
[10]	DONG Hong-yan, WANG Ke-hui, ZHOU Yu, DU Xiao-dong, ZHOU De-kun. Development of Plane Mechanism Design Analysis Bench Based on 3D Printing Technology [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 54 -57 .