Please wait a minute...
吉林化工学院学报, 2020, 37(1): 52-57     https://doi.org/10.16039/j.cnki.cn22-1249.2020.01.012
  本期目录 | 过刊浏览 | 高级检索 |
内外夹持式变径海洋基桩吊具夹持机理研究
王昆1,王茁2,王毅坚3
1.一汽吉林汽车有限公司,吉林省吉林市,132013;2. 哈尔滨工程大学,机电学院,黑龙江省哈尔滨市,150001;3.吉林化工学院,机电学院, 吉林省吉林市,132022
Study on the Internal and External Clamping Type Marine Pile Spreader with Changeable Diameter and Analysis of the Clamping Mechanism
WANG Kun1,WANG Zhuo2,WANG Yijian3
下载:  PDF (3458KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 

大型海洋基桩的起吊作业是海洋结构物施工建设工程中的一大难题。针对这一现状,本文以IHC公司的双边海洋基桩吊具为蓝本,提出一种内外夹持式变径海洋基桩吊具的结构方案。针对本文提出的吊具结构形式,通过理论求解,仿真分析以及实验研究等方法,分别对吊具的摩擦夹紧以及楔块齿嵌入夹紧两种夹紧方式进行了深入研究与对比分析,获得了在相同横向夹紧载荷作用下,吊具楔块齿嵌入夹紧方式的承载能力为摩擦夹紧方式的3倍这一结论,为实际工程应用中吊具夹紧方式的选择提供了参考。

服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王昆
王茁
王毅坚
关键词:  海洋基桩  大型吊具  夹持承载机理  楔块嵌入性能  塑性变形仿真     
Abstract: 

Lifting operation of large-scale offshore foundation piles is a difficult problem in the construction of offshore structures. In view of this situation, this paper takes IHC Company’s bilateral marine foundation pile hanger as the blueprint, and puts forward a structural scheme of "internal and external clamping type marine pile spreader" in order to improve the problems mentioned above. Aiming at the structure form of suspension proposed in this paper, by means of theoretical solution, simulation analysis and experimental research, the friction clamping and wedge tooth insertion clamping methods of suspension were studied and compared, and the bearing capacity of wedge tooth insertion clamping method of suspension is three times that of friction clamping method under the same transverse clamping load. The conclusion provides a reference for the selection of clamping mode of hanger in practical engineering application.

Key words:  marine foundation pile    large-scale spreader    clamping and load-bearing mechanism    wedge embedding performance    plastic deformation simulation
               出版日期:  2020-01-25      发布日期:  2020-01-25      整期出版日期:  2020-01-25
TH122  
引用本文:    
王昆, 王茁, 王毅坚. 内外夹持式变径海洋基桩吊具夹持机理研究 [J]. 吉林化工学院学报, 2020, 37(1): 52-57.
WANG Kun, WANG Zhuo, WANG Yijian. Study on the Internal and External Clamping Type Marine Pile Spreader with Changeable Diameter and Analysis of the Clamping Mechanism . Journal of Jilin Institute of Chemical Technology, 2020, 37(1): 52-57.
链接本文:  
https://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2020.01.012  或          https://xuebao.jlict.edu.cn/CN/Y2020/V37/I1/52
[1] 柯希禹 , 李春江, 刘孟威, 王津贺, 蔡奕炜, 王开宝. 冰雪砖抗弯抗压实验测试装置的设计与仿真分析[J]. 吉林化工学院学报, 2024, 41(5): 88-92.
[2] 胡奥帆, 李春江, 班守琦, 崔嘉航, 刘畅, 徐焕新, 王开宝. 具备压缩打包功能的旧衣物回收装置仿真分析[J]. 吉林化工学院学报, 2024, 41(3): 88-92.
[3] 王明旭, 黄鹏春, 王月※, 王申伊, 梁明万, 叶桉佟. 具有辅助上下床功能助行装置的设计 [J]. 吉林化工学院学报, 2023, 40(7): 88-92.
[4] 刘志辉 , 王鹏, 徐博, 夏一建, 栾海山, 于凤淼, 王开宝. 沙棘果采摘装置气吸输送系统的仿真分析 [J]. 吉林化工学院学报, 2022, 39(9): 75-79.
[5] 王鹏, 栾海山, 刘志辉, 夏一建, 于凤淼, 王开宝. 室外移动洗手台的设计与研究 [J]. 吉林化工学院学报, 2022, 39(1): 103-106.
[6] 刘兴德, 周海宇, 靳曦. L型板抓取柔性机械手的设计 [J]. 吉林化工学院学报, 2021, 38(3): 13-15.
[7] 梁甜甜, 王艳丽, 桓耀邦, 段佳明, 刘通. 基于小户型公寓的智能扩容家具机械结构设计 [J]. 吉林化工学院学报, 2021, 38(1): 18-21.
[8] 王志豪, 黄伟峰, 吉冰倩, 郝北方. 基于双自由度减震悬架的雪橇结构设计与仿真分析 [J]. 吉林化工学院学报, 2020, 37(11): 74-78.
[9] 刘荣辉, 陈晨, 周修宇. 可变风阻式龙舟训练器结构设计 [J]. 吉林化工学院学报, 2020, 37(9): 29-33.
[10] 张崔禹, 徐朝阳, 许浩男, 陈雪, 刘通. 脑血栓康复训练器的机械结构设计 [J]. 吉林化工学院学报, 2020, 37(3): 67-72.
[11] 杨航, 高彪, 施良才, 张啸. 智能钓鱼装置的触发弹射结构设计 [J]. 吉林化工学院学报, 2020, 37(1): 33-37.
[12] 刘通, 宋琦, 梁甜甜, 段佳明, 孙鸿鹏. 小型高效菠萝采摘机的机械结构设计 [J]. 吉林化工学院学报, 2019, 36(11): 47-49.
[13] 王昆, 王茁, 王毅坚. 灌浆卡箍在海洋下的载荷分析与实验研究 [J]. 吉林化工学院学报, 2019, 36(11): 25-32.
[14] 王月, 侯小虎, 王雷, 王梦龙, 李君. 基于STM32睡眠质量检测装置的研究 [J]. 吉林化工学院学报, 2019, 36(9): 41-43.
[15] 林新英. 磁导航AGV结构设计与控制策略 [J]. 吉林化工学院学报, 2019, 36(7): 30-35.
[1] JIANG Di, QIN Ti-zhi, HAN Ming-xuan, ZHANG Zhi-hui, ZHANG Yu. Catalytic Performance of Sulfonic Acid Resins on the Transalkylation of Dinonylphenol with Phenol[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 48 -51 .
[2] SUN Jing-yang. Selection and Application of DC LED Driver[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 73 -77 .
[3] ZHENG Yong-shun, LU Da-yong. EPR Monitoring of Oxygen-vacancy Defects in Mg-doped BaTio3 Dielectric Ceramics[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(1): 40 -43 .
[4] ZHANG Jing-jing, HE Ping. Analysis of Trace Elements in Changbai Mountain Lime Tree Pollen by ICP-ASE with High Pressure Tank Digestion[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(1): 54 -57 .
[5] HANG Dong-dong, LIU Bin, ZHANG Mian. On the Cultivation and Sublimation of the Students’Ideals in Science and Engineering Majors’Teaching[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 24 -28 .
[6] ZHANG Hui-ying. A Research into the Teaching Reform of “Optoelectronic Technology”[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(4): 29 -32 .
[7] ZHANG Dong-dong, CHEN Rui, LIU Bi. On the Theory and Practice of the Cultivation of the Integrity Concept and Conducts in Subject Education in Colleges and Universities[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(4): 69 -71 .
[8] WANG Hai-dong, XIAO Ding, BAI Jin, ZHANG Jun-de, XIAO Yao, YUAN Can, WANG Ye, DING Bin. Study on the Process for Synthesis of Polyvinyl Butyral[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(5): 5 -8 .
[9] JIANG Xiang-bing. Development of HPPO Process and Different Technique of Licensor[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(5): 9 -13 .
[10] YU Hong-chen. Analysis of the Regulating Valve Stem Fracture in Steam Turbine Feed Pump[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(5): 54 -57 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed