基于ABAQUS的波纹管建模与仿真分析

doi:10.16039/j.cnki.cn22-1249.2021.01.008

下载:

PDF (3325KB)
输出: BibTeX | EndNote (RIS)

摘要

利用ABAQUS软件对超弹性硅胶材料的波纹管进行建模，并对其内部充气加压模型进行有限元仿真分析.分析了不同波纹管壁厚对加压后的应力、轴向伸长和径向膨胀的影响。仿真结果表明:波纹管波峰处壁厚越厚，对其径向和轴向变形的约束能力越强，在薄壁情况下，加压后波纹管会存在约束不足而导致失稳的情况。该研究为波纹管在气动人工驱动器变形机理的进一步研究奠定了基础。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	梁正

关键词: 波纹管硅胶有限元仿真

Abstract:

The ABAQUS software was used to model the bellows of super-elastic silicone material, and the finite element simulation analysis was carried out on the internal inflation pressure model. The stress, axial elongation and radial direction of different bellows wall thickness after pressure were analyzed. The effect of expansion. The simulation results show that the thicker the wall at the corrugated part of the bellows, the stronger the restraining ability of its radial and axial deformation. In the case of a thin wall, the bellows may be insufficiently restrained and cause instability.

Key words:

font-family:'Times New Roman' Bellows')" href="#">">Bellows silicone sinite element simulation

出版日期: 2021-01-15 发布日期: 2021-01-15 整期出版日期: 2021-01-15

TH138.9

引用本文:

梁正. 基于ABAQUS的波纹管建模与仿真分析 [J]. 吉林化工学院学报, 2021, 38(1): 38-41.
LIANG Zheng. Modeling and Simulation Analysis of Bellows Based on ABAQUS . Journal of Jilin Institute of Chemical Technology, 2021, 38(1): 38-41.

链接本文:

https://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2021.01.008 或 https://xuebao.jlict.edu.cn/CN/Y2021/V38/I1/38

[1]	李志峰, 王海波, 李鹏涛, 王荣林, 文皓, 刘春杰. 基于有限元法的汽轮机叶片缺陷类别仿真研究 [J]. 吉林化工学院学报, 2023, 40(9): 48-54.
[2]	宋懋征, 刘晓敏, 梁佳祺. 基于ABAQUS的气动软体径向膨胀驱动器结构优化 #br# [J]. 吉林化工学院学报, 2022, 39(1): 95-101.
[3]	梁正, 裴怡杰. 基于实验方法的硅胶圆管柔性关节静力学研究 [J]. 吉林化工学院学报, 2021, 38(3): 52-56.
[4]	秦鹏, 刘晓敏, 耿晓琳, 田德宝, 孙国栋. 气动软体驱动器的设计 [J]. 吉林化工学院学报, 2020, 37(11): 57-60.

[1]	JIANG Di, QIN Ti-zhi, HAN Ming-xuan, ZHANG Zhi-hui, ZHANG Yu. Catalytic Performance of Sulfonic Acid Resins on the Transalkylation of Dinonylphenol with Phenol[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 48 -51 .
[2]	BAI Xue, BAI Yong-guo, DING Wen-hao. Internet +720° Panoramic Image Display Platform Design and Implementation[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 83 -86 .
[3]	ZHOU Hong-li, ZHANG Yang, CUI Hao, XUE Jian-fei. Primary Exploration of the Applied Pharmaceutical Talents Training in Ordinary Engineering Colleges Based on Social Needs and R ecruitment Drives[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 1 -4 .
[4]	CHEN Dong-song. Research on Internal Governance System of Local Engineering Colleges Under the View of Organizational Culture[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 16 -20 .
[5]	LI Peng, SONG Chen-hu, WAN Kun. Causes and Prevention Measuresagainst Postgraduates’ Academic Misconducts[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 51 -54 .
[6]	WANG Li-xia, SHI Yu-qi. Customer Behavior Analysis and Customer Interest Development in the Context of WeChat Business[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 84 -92 .
[7]	HU Xiao-yan, CHEN Zhuo. The Influence of Chinese Traditional Family Instructions on Family Construction[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(4): 11 -14 .
[8]	ZHANG Hui-ying. A Research into the Teaching Reform of “Optoelectronic Technology”[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(4): 29 -32 .
[9]	TAO Ye. Current Situation of Automotive Major Students’In-post Practice of in Higher Vocational Colleges and Countermeasures[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(4): 94 -96 .
[10]	XU Hong-jun, TIAN Wei-qi, SHU Qing, ZHANG Xin-lu. Study on the Design of Self-Service Station with Ring Fueling Island[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(5): 1 -4 .