Please wait a minute...
吉林化工学院学报, 2019, 36(11): 22-24     https://doi.org/10.16039/j.cnki.cn22-1249.2019.11.006
  本期目录 | 过刊浏览 | 高级检索 |
中储式机组倒仓系统方案设计
戚胜1,李想2
1.吉林化工学院 机电工程学院,吉林 吉林 132012;2.吉林化工学院 机电工程学院,吉林 吉林 132012
Design of Coal Conveying System of Bunker of Bin and Feeder System
QI Sheng1,LI Xiang2
下载:  PDF (553KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 

采用气力对特殊环境下的粉体进行输送具有重要意义,根据运行现场的实际情况,设计气力输送系统。在充分利用好现场制粉系统本身负压的前提下,对输煤系统管道内煤粉气流的流动状态进行一定优化。例如:在管道内设置增压风和弯管部分增设导叶等方法,达到减少输送阻力和提高分离效率的目的。同时,此设计方案可以大大降低劳动力的使用,一定程度上可以减少由于人工操作所带来的污染环境、煤粉损失大及粉尘爆炸所产生的风险。

服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
戚胜
李想
关键词:  气力输送  增压管  输送阻力     
Abstract: 

It is of great importance to use pneumatic conveying system in some special situations,According to the existing field condition,the new conveying system was designed.Taking advantage of negative pressure of the system and optimizing of coal-air flow in the tube.For example, the method of setting pressurizing wind in the pipeline and adding guide vane in the bend part can reduce the conveying resistance and improve the separation efficiency. At the same time, this design scheme can greatly reduce the use of labor force, to a certain extent, can reduce the risk of pollution environment, pulverized coal loss and dust explosion caused by manual operation.

Key words:  Pneumatic conveying    Pressurizing wind tube    Conveying resistance
               出版日期:  2019-11-25      发布日期:  2019-11-25      整期出版日期:  2019-11-25
TK228  
引用本文:    
戚胜, 李想. 中储式机组倒仓系统方案设计 [J]. 吉林化工学院学报, 2019, 36(11): 22-24.
QI Sheng, LI Xiang. Design of Coal Conveying System of Bunker of Bin and Feeder System . Journal of Jilin Institute of Chemical Technology, 2019, 36(11): 22-24.
链接本文:  
https://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2019.11.006  或          https://xuebao.jlict.edu.cn/CN/Y2019/V36/I11/22
[1] 李想, 戚胜.

小型卧式一次折流生物质燃气锅炉设计及数值研究 [J]. 吉林化工学院学报, 2024, 41(7): 79-85.

[2] 戚胜, 李想. 小型燃气锅炉掺烧生物质气的模拟[J]. 吉林化工学院学报, 2024, 41(5): 60-65.
[3] 李想, 谷闯, 戚胜. 离子交换法在煤炭脱钠提质上的应用研究 [J]. 吉林化工学院学报, 2018, 35(11): 25-27.
[1] WANG Ya-hong, JIA Ying-chao. Optimization for Soxhlet Extraction of Total Flavonoids from Eggplant Root by Using Response Surface Methodology[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 1 -6 .
[2] PAN Hong-wei, ZHOU Hong-li. Research Progress on Extraction Technology and Component Analysis of Volatile Flavor Compounds in Plants[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 7 -10 .
[3] YAN Zhen-han, CHEN Qing. Analysis of Pressure Sealing Technology Research[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 11 -14 .
[4] LV Xue-fei, LIU Shuang, GAN Shu-kun. New Technology of Compound Rare Earth Salt Conversion on Copper Alloy Surface[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 19 -22 .
[5] ZHOU Zhen-qiang, WANG Kai-bao, CHEN Yu-tian, HAN Ji, HOU Dai-bing, GUO Wen-qi. Analysis of the Design and Dynamic Characteristics of Recyclable Garbage Crushing Device[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 31 -35 .
[6] ZHU Qi-rui, ZHANG Yu-feng, LI Yang-xin, WU Dong-jun, BI Shuai-nan, ZHOU Rui-jie, YOU Sai-sai. The Structural Design and Parameter Analysis of the Chair Structure of Quadriplegia of Cerebral Palsy[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 40 -44 .
[7] ZHANG Yun-peng. Preparation and Characterization of Er3+Y3+Yb3+ Co-doped Al2O3 Luminescence Materials[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 58 -63 .
[8] MI Ya-wei. Proof of the Manifold of n Manifold[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 64 -66 .
[9] XU You-zhuan, ZHOU Hou-qing. The Lower Bounds of Energy for Some Circulant Graph[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 67 -72 .
[10] LIU Rong-hui, GENG De-xu, LIU Qi. The Structure Design and Gait Planning of the Pneumatic Flexible Joint Hexapod Robot[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(1): 23 -27 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed