Please wait a minute...
吉林化工学院学报, 2025, 42(1): 82-86     https://doi.org/10.16039/j.cnki.cn22-1249.2025.01.013
  本期目录 | 过刊浏览 | 高级检索 |
铝含量对AlxCrFeNi高熵合金微观组织和力学性能的影响
余彬,高玉珍,张伊航,王遵广,程艳艳*
(吉林化工学院 机电工程学院,吉林 吉林 132022)
Effect of Al Content on Microstructure and Mechanical Properties of AlxCrFeNi High Entropy Alloy
YU Bin,GAO Yuzhen,ZHANG Yihang,WANG Zunguang,CHENG Yanyan*
(School of Mechanical and Electrical Engineering ,Jilin Institude of Chemical Technology , Jilin City 132022,China)
下载:  PDF (7452KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 用真空熔炼法制备了 ALxCrFeNi多主元高熵合金,利用光学显微镜、X射线衍射仪、扫描电子显微镜等研究了 ALxCrFeNi合金组织,并对合金进行了硬度及压缩试验。结果表明:A1xCrFeNi(x=0.7、1、1.3、1.6)高熵合金均由FCC和 BCC相组成,随着铝含量的增加,BCC相含量上升,合金硬度随之提升此外,在压缩实验中合金的极限强度和工程应变随 A1含量的增加呈现显著的增强趋势。研究结果将为AlxCrFeNi高熵合金的成分优化和性能调控提供理论依据。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
余彬
高玉珍
张伊航
王遵广
程艳艳
关键词:  高熵合金   微观组织   力学性能    
Abstract: AlxCrFeNi high entropy alloy was prepared by vacuum melting.The microstructure of AlxCrFeNalloy was studied by optical microscope, X-ray diffractometer and scanning electron microscope, and the hardness and compression tests were carried out.The results showed that AlxCrFeNi( x = 0.7、1.0、1.3 、1.6 )high-entropy alloys were all composed of FCC and BCC phases. With the increased of aluminum content . the BCC phase content increased , and the alloy hardness increased accordingly.In addition , the ultimate strength and engineering strain of the alloy showed a significant increase trend with the increase of Al content in the compression experiment.
Key words:  high entropy alloy         microstructure    mechanical property
               出版日期:  2025-01-25      发布日期:  2025-07-05      整期出版日期:  2025-01-25
ZTFLH:  TG 131  
引用本文:    
余彬, 高玉珍, 张伊航, 王遵广, 程艳艳. 铝含量对AlxCrFeNi高熵合金微观组织和力学性能的影响[J]. 吉林化工学院学报, 2025, 42(1): 82-86.
YU Bin, GAO Yuzhen, ZHANG Yihang, WANG Zunguang, CHENG Yanyan. Effect of Al Content on Microstructure and Mechanical Properties of AlxCrFeNi High Entropy Alloy. Journal of Jilin Institute of Chemical Technology, 2025, 42(1): 82-86.
链接本文:  
https://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2025.01.013  或          https://xuebao.jlict.edu.cn/CN/Y2025/V42/I1/82
[1] 解玉鹏, 周新龙. 热压制备SiC/Si3N4陶瓷复合材料的力学性能研究[J]. 吉林化工学院学报, 2024, 41(1): 26-31.
[2] 马晓坤, 杨 锐, 康宁, 王瑞. 3D打印成型技术及工艺参数优化设计 [J]. 吉林化工学院学报, 2022, 39(11): 64-70.
[3] 宋兵, 孙恒, 潘林泽, 王超. 复掺煅烧硅藻土的玻化微珠再生混凝土力学性能 #br# [J]. 吉林化工学院学报, 2022, 39(1): 80-85.
[4] 许文智, 武广斌, 王佩, 杨航, 薛皓然, 周程程, 孙宇博. 气动柔性三肌肉轴向驱动器力学性能研究 [J]. 吉林化工学院学报, 2021, 38(7): 91-95.
[5] 梁正, 武广斌. 伸长型气动柔性驱动器设计与实验 [J]. 吉林化工学院学报, 2021, 38(5): 70-73.
[6] 佀庆波, 金范龙. 聚氨酯/三聚氰胺甲醛树脂互穿网络硬质泡沫性能的研究 [J]. 吉林化工学院学报, 2020, 37(7): 68-71.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed