ABS接枝马来酸酐增容ABS/PMMA复合材料机械性能及形貌分析

doi:10.16039/j.cnki.cn22-1249.2019.03.014

下载:

PDF (1902KB)
输出: BibTeX | EndNote (RIS)

摘要

以丙烯腈-丁二烯-苯乙烯共聚物(ABS)接枝马来酸酐为相容剂，制备不同增强剂含量下的ABS/聚甲基丙烯酸甲酯( PMMA )共混合金。研究不同配比ABS接枝马来酸酐相容剂对ABS /PMMA共聚材料的力学性能等特性影响规律。结果表明，ABS接枝马来酸酐增容 PMMA提升复合材料的力学性能；当相容剂含量在8%时，拉伸强度可提高到55.1MPa极值；PMMA 的加入提高 ABS 力学性能；共混物呈现较单一聚合物更优异综合性能；合金中PMMA∶ABS为20:80时，其综合力学性能处于最佳组合。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	林明穗
	张昌婷
	赵炎
	罗菊香
	苏志忠

关键词: 丙烯腈-丁二烯-苯乙烯共聚物聚甲基丙烯酸甲酯接枝改性马来酸酐

Abstract:

Acrylonitrile butadiene styrene (ABS)/ Poly-methyl-methacrylate (PMMA) composites were investigated using ABS grafted maleic anhydride as compatibilizer. The effects of different ratio of compatibilizer on the impact strengthand tensile strengthcharacteristics of ABS/PMMA were discussed. Results showed that ABS grafted maleic anhydride compatibilized PMMA improved the mechanical properties of the blends, The tensile property of composites could be increased to the maximum of 55.1 MPa, when the content of compatibilizer was 8%; The adjunction of PMMA improved the performance of ABSMechanical Properties; It has been found that the blend produces the excellent combination of the Comprehensive mechanical properties with the ratio of ABS:PMMA=80:20.

Key words: ABS PMMA graft modification maleic anhydride

出版日期: 2019-03-25 发布日期: 2019-03-25 整期出版日期: 2019-03-25

ZTFLH:

TQ325.7

引用本文:

林明穗, 张昌婷, 赵炎, 罗菊香, 苏志忠. ABS接枝马来酸酐增容ABS/PMMA复合材料机械性能及形貌分析 [J]. 吉林化工学院学报, 2019, 36(3): 69-73.
LIN Mingsui, ZHANG Changting, ZHAO Yan, LUO Juxiang, SU Zhizhong. Morphology and Mechanical Properties of ABS Grafted Maleic Anhydride Compatibilized ABS/PMMA Composites . Journal of Jilin Institute of Chemical Technology, 2019, 36(3): 69-73.

链接本文:

http://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2019.03.014 或 http://xuebao.jlict.edu.cn/CN/Y2019/V36/I3/69

[1]	WANG Ya-hong, JIA Ying-chao. Optimization for Soxhlet Extraction of Total Flavonoids from Eggplant Root by Using Response Surface Methodology[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 1 -6 .
[2]	PAN Hong-wei, ZHOU Hong-li. Research Progress on Extraction Technology and Component Analysis of Volatile Flavor Compounds in Plants[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 7 -10 .
[3]	ZHOU Zhen-qiang, WANG Kai-bao, CHEN Yu-tian, HAN Ji, HOU Dai-bing, GUO Wen-qi. Analysis of the Design and Dynamic Characteristics of Recyclable Garbage Crushing Device[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 31 -35 .
[4]	ZHU Qi-rui, ZHANG Yu-feng, LI Yang-xin, WU Dong-jun, BI Shuai-nan, ZHOU Rui-jie, YOU Sai-sai. The Structural Design and Parameter Analysis of the Chair Structure of Quadriplegia of Cerebral Palsy[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 40 -44 .
[5]	ZHANG Yun-peng. Preparation and Characterization of Er³⁺，Y³⁺，Yb³⁺ Co-doped Al₂O₃ Luminescence Materials[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 58 -63 .
[6]	MI Ya-wei. Proof of the Manifold of n Manifold[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 64 -66 .
[7]	XU You-zhuan, ZHOU Hou-qing. The Lower Bounds of Energy for Some Circulant Graph[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 67 -72 .
[8]	ZHOU Hong-li, ZHANG Yang, CUI Hao, XUE Jian-fei. Primary Exploration of the Applied Pharmaceutical Talents Training in Ordinary Engineering Colleges Based on Social Needs and R ecruitment Drives[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 1 -4 .
[9]	YANG Xiu-dong, WANG Ya-hong, ZHANG Pin-mei, YANG Yan-jun, CUI Hao, ZHOU Hong-li. Discussion on the Practice Teaching Reform of Pharmaceutical Engineering Based on Engineering Education Professional Accreditation[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 5 -7 .
[10]	LI Long, WANG Xue-mei. Research on Higher Education Assessment Mode Based on Formative Evaluation and Information Entropy Theory[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 8 -12 .