Please wait a minute...
吉林化工学院学报, 2018, 35(11): 76-79     https://doi.org/10.16039/j.cnki.cn22-1249.2018.11.020
  本期目录 | 过刊浏览 | 高级检索 |
烧结温度对长余辉发光材料Ca2Zn4Ti15O36:Pr3+光性能的影响
魏白光,吕秋月
吉林化工学院 教务处;吉林毓文中学
Effect of Sintering Temperature on Optical Properties of Long-Lasting Luminescent Material Ca2Zn4Ti15O36:Pr3+
WEI Bai-guang, LV Qiu-yue
下载:  PDF (962KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 

利用溶胶-凝胶法合成发光材料Ca2Zn4Ti15O36:Pr3+,通过用X射线衍射(XRD)、拉曼光谱(Raman)和激发光谱、发射光谱对固溶体的微结构和光学性能进行了表征。XRD分析结果表明: 经1050℃烧结22h后XRD衍射峰峰值最高,结晶度最好,样品的晶粒尺寸在100nm-200nm之间。Raman结果表明:Pr的掺杂并没有使谱峰强度有所变化,反映出Pr的掺杂量对样品表面性质影响不大。激发光和发射光谱表明:烧结温度为800℃时,激发和发射峰值最强,激发峰为312nm。发射峰为614nm。

服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
魏白光
吕秋月
关键词:  XRD  Pr3+离子  激发光谱  发射光谱  烧结温度     
Abstract: 

Ca2Zn4Ti15O36:Pr3+red long lasting phosphorescent materials were prepared by sol-gel method.The microstructure and optical properties of the solid solution were characterized by X ray diffraction (XRD), Raman spectroscopy (Raman), excitation spectrum and emission spectrum. The results of XRD analysis show that samples calcined at 1050 ℃ for 22 h possessed, the peak value of XRD diffraction peak is the highest and the crystallinity is the best. The grain size of the sample is between 100nm-200nm. Raman results showed that the doping intensity of Pr did not change the peak intensity, indicating that the doping amount of Pr had little effect on the surface properties of the samples. The excitation and emission spectra show that when the sintering temperature is 800℃, the peak value of excitation and emission is the strongest and the excitation peak is 312nm. The emission peak is 614nm.

Key words:  XRD    Pr3+    excitation spectrum    emission spectrum    sintering temperature
               出版日期:  2018-11-25      发布日期:  2018-11-25      整期出版日期:  2018-11-25
0434.3  
引用本文:    
魏白光, 吕秋月. 烧结温度对长余辉发光材料Ca2Zn4Ti15O36:Pr3+光性能的影响 [J]. 吉林化工学院学报, 2018, 35(11): 76-79.
WEI Bai-guang, LV Qiu-yue. Effect of Sintering Temperature on Optical Properties of Long-Lasting Luminescent Material Ca2Zn4Ti15O36:Pr3+ . Journal of Jilin Institute of Chemical Technology, 2018, 35(11): 76-79.
链接本文:  
https://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2018.11.020  或          https://xuebao.jlict.edu.cn/CN/Y2018/V35/I11/76
[1] 解玉鹏, 周新龙. 热压制备SiC/Si3N4陶瓷复合材料的力学性能研究[J]. 吉林化工学院学报, 2024, 41(1): 26-31.
[2] 张京京, 何 萍. 高压密封罐消解-ICP-AES 法测定长白山椴树蜂花粉中多种微量元素[J]. 吉林化工学院学报, 2018, 35(1): 54-57.
[1] PAN Hong-wei, ZHOU Hong-li. Research Progress on Extraction Technology and Component Analysis of Volatile Flavor Compounds in Plants[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 7 -10 .
[2] YAN Zhen-han, CHEN Qing. Analysis of Pressure Sealing Technology Research[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 11 -14 .
[3] SUN Xiao-feng, YU Wen-xin, ZHU Ming-wei, JIE Meng, JIANG De-lon. Research on the Piezoelectric Pump Application in Continuous Ink Supply System of the Inkjet Printer[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 15 -18 .
[4] ZHOU Zhen-qiang, WANG Kai-bao, CHEN Yu-tian, HAN Ji, HOU Dai-bing, GUO Wen-qi. Analysis of the Design and Dynamic Characteristics of Recyclable Garbage Crushing Device[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 31 -35 .
[5] XU You-zhuan, ZHOU Hou-qing. The Lower Bounds of Energy for Some Circulant Graph[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 67 -72 .
[6] SUN Jing-yang. Selection and Application of DC LED Driver[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 73 -77 .
[7] BAI Xue, BAI Yong-guo, DING Wen-hao. Internet +720° Panoramic Image Display Platform Design and Implementation[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 83 -86 .
[8] CHEN Li, FU Qiang, WANG Gui-ying, HE Long, WANG Hong-yan, SUN Chun-guo. Study on Pyrolysis Kinetics of Oil Shale Underground in Situ[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(1): 1 -3 .
[9] HAN Yun-hua, SHI Lei. Study on Synthesis of Polyol Acrylate[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(1): 4 -7 .
[10] ZENG Xiao-dan, JIANG Cheng, XI Hao, ZHU Lin. The Study of Determination of Carbon Tetrachloride Divergence in the Chlorosulfonated Polyethylene (CSM) Production Process[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(1): 8 -12 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed