不同截面形状薄壁构件斜向碰撞性能分析
谭丽辉,谭洪武
吉林化工学院 机电工程学院;中油吉林石化公司有机合成厂 乙丙橡胶车间
The Crashworthiness Analysis of different Cross-Section Thin-Walled Components
TAN Li-hui, TAN Hong-wu
摘要
本文采用非线性有限元软件LS-DYNA,分别对圆形、正方形、长方形、正六边形、正八边形等截面形状不同,但质量相同的薄壁构件,在斜向载荷撞击下的抗撞性能进行数值分析计算。得到了其在不同载荷角下的碰撞响应,并对其变形模式、吸能特性和最大峰值冲击载荷进行了比较,数值计算结果表明:正方形截面薄壁构件在斜向冲击下的抗撞性能最优,长方形截面最弱。
关键词:
薄壁构件
不同截面
抗撞性
斜向碰撞
Abstract:
The collision response of the same quality thin-walled components with different cross-section such as circular、square、rectangle、hexagonal and octagonal were got by using nonlinear element soft LS-DYNA at different oblique load. Deformation mode, the peak force-crushing and energy absorption characteristics of all thin-walled components with different cross section were compared. The numerical results showed crashworthiness of square-shaped thin-walled members were significantly better than others, but the rectangular cross section was the weakest.
Key words:
thin-walled components
different cross-section
crashworthiness
oblique impact
出版日期: 2018-09-25
发布日期: 2018-09-25
整期出版日期: 2018-09-25
[1]
WANG Ya-hong, JIA Ying-chao. Optimization for Soxhlet Extraction of Total Flavonoids from Eggplant Root by Using Response Surface Methodology [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 1
-6
.
[2]
PAN Hong-wei, ZHOU Hong-li. Research Progress on Extraction Technology and Component Analysis of Volatile Flavor Compounds in Plants [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 7
-10
.
[3]
YAN Zhen-han, CHEN Qing. Analysis of Pressure Sealing Technology Research [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 11
-14
.
[4]
SUN Xiao-feng, YU Wen-xin, ZHU Ming-wei, JIE Meng, JIANG De-lon. Research on the Piezoelectric Pump Application in Continuous Ink Supply System of the Inkjet Printer [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 15
-18
.
[5]
LV Xue-fei, LIU Shuang, GAN Shu-kun. New Technology of Compound Rare Earth Salt Conversion on Copper Alloy Surface [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 19
-22
.
[6]
SONG Qi, LIU Peng, CHEN X, LIU Tong. Mechanical Structure Design of the Chocolate 3D Printer [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 23
-26
.
[7]
HAN Jie, WANG Kai-bao, ZHOU Zhen-qiang, LIU Yu-li, SONG Chun-lei, QIN Qing-kun. Design and Modal Analysis of Ozone Disinfection Cleaning Machine for Fruits and Vegetables [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 27
-30
.
[8]
ZHOU Zhen-qiang, WANG Kai-bao, CHEN Yu-tian, HAN Ji, HOU Dai-bing, GUO Wen-qi. Analysis of the Design and Dynamic Characteristics of Recyclable Garbage Crushing Device [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 31
-35
.
[9]
LIU Hong-bo, LIU Qi. Experimental Study on Pneumatic Space Bending Flexible Joint [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 36
-39
.
[10]
ZHU Qi-rui, ZHANG Yu-feng, LI Yang-xin, WU Dong-jun, BI Shuai-nan, ZHOU Rui-jie, YOU Sai-sai. The Structural Design and Parameter Analysis of the Chair Structure of Quadriplegia of Cerebral Palsy [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 40
-44
.
Viewed
Full text
Abstract
Cited
Shared
Discussed