圆柱表面二次曲线轮廓型腔四轴数控宏程序编程及VERICUT仿真加工
耿晓明1 ,张德山2
1.安徽电子信息职业技术学院 机电工程学院,安徽 蚌埠, 233030 2.蚌埠凯盛工程技术有限公司 机电设备厂,安徽 蚌埠, 233000
Four-axis NC Macro Programming and VERICUT Simulation Machining based on Cylindrical Surface Conic Profile Cavity
GENG Xiaoming1 ,ZHANG Deshan2
摘要
通过圆柱表面椭圆轮廓型腔进行数理分析,得出坐标参数间的关联关系,采用变量进行手工宏程序编程,并利用VERICUT软件模拟生产条件,对宏程序进行仿真加工验证,程序经仿真加工效果良好。故在类似曲线轮廓及其型腔加工时,可通过分析及构建加工曲线轮廓的相关参数联系,采用四轴宏程序编程的加工方式,有效发挥宏程序的编程优势完成数控加工,提高生产实效。
关键词:
二次曲线
型腔
四轴
宏程序
仿真
Abstract:
Through the mathematical analysis of the elliptic contour cavity on the cylindrical surface, the correlation between the coordinate parameters was obtained. The manual macro program was programmed with variables, and the VERICUT software was used to simulate the production conditions to verify the simulation processing of the macro program, and the machining effect was good. In the processing of similar curve contour and its cavity structure, the relevant parameters of the curve contour can be analyzed and constructed, and the processing method of four-axis macro program can be adopted to give full play to the programming advantage of macro program effectively and improve the production effect.
Key words:
quadratic curve
cavity
four-axis
microprogram
simulating manufacturing
出版日期: 2022-01-25
发布日期: 2022-01-25
整期出版日期: 2022-01-25
[1]
. [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 0
.
[2]
. [J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 0
.
[3]
SHAO Bao-li, LU Da, ZHAO Dong-hui. The Application of Dimensional Analysis in the Physical Quantity Conversion between Physical System and Numerical System
[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 1
-3
.
[4]
ZHANG Jian, ZHAO Xiang, QU Bo, WU Qi, LIU Yu-tong, LI Yu-shi, LIU Qun.
Application of Phosphorus-sulfur-nitrogen Composite Flame Retardant in Cotton Fabric
[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 4
-7
.
[5]
WU Ping, REN Hong, LU Fei, WEI Qingling.
A Functional Material on Recognition of Zn(II) ions based on the New Azo Compound
[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 8
-10
.
[6]
YANG Yan-jun, WANG Ya-hong, Yang Xiu-dong.
Process Aptimization of Surfactant Assisted Extraction of Total Polyphenols from Kyllinga Brevifolia Rottb
[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 11
-15
.
[7]
LIU Jin-lu, LEI Yong-ping, WANG xiao-lin, ZHONG fang-li.
Study on the Purification Method of Total Saponins fromFruit of Rosa Davuvrica Pall. and its Purification Method
[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 16
-23
.
[8]
SONG Jian-gang, ZHONG Fang-li, WANG Xiao-lin, LIN Yu.
Study on Extraction of Anthocyanin from Aronia melanocarpa Fruit by Ionic liquid Ultrasound Assisted
[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 24
-31
.
[9]
TAN Li-hui, TAN Hong-wu.
The Crashworthiness Analysis of different Cross-Section Thin-Walled Components
[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 32
-35
.
[10]
YU Wen-xin, ZHENG Kai, WANG Li-hui, LIU Hai-bo, Wang Jian-xin.
The Influence of Magnetostrictive Transducer Radiation Plate material on Radiation Sound Field Distribution
[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 36
-40
.
Viewed
Full text
Abstract
Cited
Shared
Discussed