Please wait a minute...
吉林化工学院学报, 2020, 37(5): 20-24     https://doi.org/10.16039/j.cnki.cn22-1249.2020.05.005
  本期目录 | 过刊浏览 | 高级检索 |
基于Fluent的拉瓦尔喷嘴结构优化设计
陆洪杰,甘树坤*,吕雪飞
吉林化工学院 机电工程学院,吉林 吉林 132022
Structure Optimization Design of Laval Nozzle Based on Fluent
LU Hongjie,GAN Shukun*,LV Feixue
下载:  PDF (3567KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 

拉瓦尔喷嘴进口直径、喉管直径、喷管出口直径、收缩段长度,扩张段长度对于其雾化效果都有一定的影响。本文采用无量纲量的方法,通过Fluent对拉瓦尔喷嘴结构中喉管直径、喷管进口直径、收缩段长度三个变量配合的多种工况进行仿真研究,从而得到拉瓦尔喷嘴最优的结构参数。

服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
陆洪杰
甘树坤
吕雪飞
关键词:  拉瓦尔喷嘴  结构参数  无量纲量  仿真分析     
Abstract: 

The diameter of the inlet of the Laval nozzle, the diameter of the throat, the diameter of the outlet of the nozzle, the length of the contraction section, and the length of the expansion section have certain effects on its atomization effect. In this paper, a dimensionless quantity method is used to simulate and study a variety of working conditions with three variables of throat diameter, nozzle inlet diameter, and contraction length in the Laval nozzle structure by Fluent to obtain the optimal structure of the Laval nozzle parameter.

Key words:  Laval nozzle    structural parameters    dimensionless quantities    simulation analysis
               出版日期:  2020-05-25      发布日期:  2020-05-25      整期出版日期:  2020-05-25
TK 229  
引用本文:    
陆洪杰, 甘树坤, 吕雪飞. 基于Fluent的拉瓦尔喷嘴结构优化设计 [J]. 吉林化工学院学报, 2020, 37(5): 20-24.
LU Hongjie, GAN Shukun, LV Feixue. Structure Optimization Design of Laval Nozzle Based on Fluent . Journal of Jilin Institute of Chemical Technology, 2020, 37(5): 20-24.
链接本文:  
https://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2020.05.005  或          https://xuebao.jlict.edu.cn/CN/Y2020/V37/I5/20
[1] 刘麒, 高康盛, 孙万龙, 叶泽, 王影. 多关节仿生机器鱼建模分析与仿真 [J]. 吉林化工学院学报, 2023, 40(11): 26-31.
[2] 甘树坤, 陆洪杰, 吕雪飞. 燃油温度及喷嘴结构对燃油内部流动性能影响研究 [J]. 吉林化工学院学报, 2021, 38(9): 60-66.
[3] 陆洪杰, 甘树坤, 吕雪飞. 燃油喷嘴结构参数对空化性能的影响研究 [J]. 吉林化工学院学报, 2021, 38(3): 22-26.
[1] SUN Xiao-feng, YU Wen-xin, ZHU Ming-wei, JIE Meng, JIANG De-lon. Research on the Piezoelectric Pump Application in Continuous Ink Supply System of the Inkjet Printer[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 15 -18 .
[2] LV Xue-fei, LIU Shuang, GAN Shu-kun. New Technology of Compound Rare Earth Salt Conversion on Copper Alloy Surface[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 19 -22 .
[3] JIANG Di, QIN Ti-zhi, HAN Ming-xuan, ZHANG Zhi-hui, ZHANG Yu. Catalytic Performance of Sulfonic Acid Resins on the Transalkylation of Dinonylphenol with Phenol[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 48 -51 .
[4] SUN Jing-yang. Selection and Application of DC LED Driver[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 73 -77 .
[5] BAI Xue, BAI Yong-guo, DING Wen-hao. Internet +720° Panoramic Image Display Platform Design and Implementation[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 83 -86 .
[6] HAN Yun-hua, SHI Lei. Study on Synthesis of Polyol Acrylate[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(1): 4 -7 .
[7] LIANG Yue, LU Da-yong. Study on the Site Occupations of Tm3+ Ions in BaTiO3 Dielectric Ceramics[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(1): 44 -46 .
[8] LIU Qiao-li, LIU Jun-wei, YANG Ai-hong, LU Da-yong. Preparation and structural Characterization of Mn-doped BaTiO3 Ceramics with Hexagonal Phase[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(1): 47 -50 .
[9] ZHANG Peng. Failure Analysis and Preventive Measures of Emergency Valve In a Certain Type of Aircraft[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(1): 71 -75 .
[10] YANG Xiu-dong, WANG Ya-hong, ZHANG Pin-mei, YANG Yan-jun, CUI Hao, ZHOU Hong-li. Discussion on the Practice Teaching Reform of Pharmaceutical Engineering Based on Engineering Education Professional Accreditation[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 5 -7 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed