基于3D打印技术的平面机构设计分析实验台的研制

doi:10.16039/j.cnki.cn22-1249.2018.09.012

下载:

PDF (2151KB)
输出: BibTeX | EndNote (RIS)

摘要

本文所提出的平面机构设计分析实验台是一种可广泛应用于全国各大高校开展设计性开放性实验的实验平台。实验平台可以实现目前大部分任意尺寸平面机构稳定地安装在实验平台上并且在电机驱动下平稳地运转后得出相应的实验数据。实验平台本身与现有平台相比可随着构件尺寸的变化支撑横梁与支撑立柱的位置可相应变化，并利用3D打印技术实验者自主打印出所需构件，本实验台不提供任何构件，确保实验自主设计性与开放性。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	董宏研
	王柯惠
	周宇
	杜晓东
	刘晓波

关键词: 平面机构实验台 3D打印设计性开放性

Abstract:

The experimental platform for planar mechanism design and analysis presented in this paper is an experimental platform which can be widely used in designing and opening experiments in major universities throughout the country. The experimental platform can realize that most of the planar mechanisms at any size are stably installed on the experimental platform, and the corresponding experimental data are obtained after the smooth operation of the motor. Experimental platform with the existing platform can be compared with the size of the components change support beam and the supporting upright position can be changed, and the use of 3D printing technology to print out the experimenter independent component, the platform does not provide any component, ensure the independent design and open. This paper introduces the experiment platform of plane mechanism.

Key words: planar mechanism experimental platform 3D printing design openness

出版日期: 2018-09-25 发布日期: 2018-09-25 整期出版日期: 2018-09-25

ZTFLH:

TH132.4

引用本文:

董宏研, 王柯惠, 周宇, 杜晓东, 刘晓波. 基于3D打印技术的平面机构设计分析实验台的研制 [J]. 吉林化工学院学报, 2018, 35(9): 54-57.
DONG Hong-yan, WANG Ke-hui, ZHOU Yu, DU Xiao-dong, ZHOU De-kun. Development of Plane Mechanism Design Analysis Bench Based on 3D Printing Technology . Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 54-57.

链接本文:

http://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2018.09.012 或 http://xuebao.jlict.edu.cn/CN/Y2018/V35/I9/54

[1]	WANG Ya-hong, JIA Ying-chao. Optimization for Soxhlet Extraction of Total Flavonoids from Eggplant Root by Using Response Surface Methodology[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 1 -6 .
[2]	PAN Hong-wei, ZHOU Hong-li. Research Progress on Extraction Technology and Component Analysis of Volatile Flavor Compounds in Plants[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 7 -10 .
[3]	ZHOU Zhen-qiang, WANG Kai-bao, CHEN Yu-tian, HAN Ji, HOU Dai-bing, GUO Wen-qi. Analysis of the Design and Dynamic Characteristics of Recyclable Garbage Crushing Device[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 31 -35 .
[4]	ZHU Qi-rui, ZHANG Yu-feng, LI Yang-xin, WU Dong-jun, BI Shuai-nan, ZHOU Rui-jie, YOU Sai-sai. The Structural Design and Parameter Analysis of the Chair Structure of Quadriplegia of Cerebral Palsy[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 40 -44 .
[5]	ZHANG Yun-peng. Preparation and Characterization of Er³⁺，Y³⁺，Yb³⁺ Co-doped Al₂O₃ Luminescence Materials[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 58 -63 .
[6]	MI Ya-wei. Proof of the Manifold of n Manifold[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 64 -66 .
[7]	XU You-zhuan, ZHOU Hou-qing. The Lower Bounds of Energy for Some Circulant Graph[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 67 -72 .
[8]	ZHOU Hong-li, ZHANG Yang, CUI Hao, XUE Jian-fei. Primary Exploration of the Applied Pharmaceutical Talents Training in Ordinary Engineering Colleges Based on Social Needs and R ecruitment Drives[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 1 -4 .
[9]	YANG Xiu-dong, WANG Ya-hong, ZHANG Pin-mei, YANG Yan-jun, CUI Hao, ZHOU Hong-li. Discussion on the Practice Teaching Reform of Pharmaceutical Engineering Based on Engineering Education Professional Accreditation[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 5 -7 .
[10]	LI Long, WANG Xue-mei. Research on Higher Education Assessment Mode Based on Formative Evaluation and Information Entropy Theory[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 8 -12 .