不同截面形状薄壁构件斜向碰撞性能分析

doi:10.16039/j.cnki.cn22-1249.2018.09.007

下载:

PDF (944KB)
输出: BibTeX | EndNote (RIS)

摘要

本文采用非线性有限元软件LS-DYNA，分别对圆形、正方形、长方形、正六边形、正八边形等截面形状不同，但质量相同的薄壁构件，在斜向载荷撞击下的抗撞性能进行数值分析计算。得到了其在不同载荷角下的碰撞响应，并对其变形模式、吸能特性和最大峰值冲击载荷进行了比较，数值计算结果表明：正方形截面薄壁构件在斜向冲击下的抗撞性能最优，长方形截面最弱。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	谭丽辉
	谭洪武

关键词: 薄壁构件不同截面抗撞性斜向碰撞

Abstract:

The collision response of the same quality thin-walled components with different cross-section such as circular、square、rectangle、hexagonal and octagonal were got by using nonlinear element soft LS-DYNA at different oblique load. Deformation mode, the peak force-crushing and energy absorption characteristics of all thin-walled components with different cross section were compared. The numerical results showed crashworthiness of square-shaped thin-walled members were significantly better than others, but the rectangular cross section was the weakest.

Key words: thin-walled components different cross-section crashworthiness oblique impact

出版日期: 2018-09-25 发布日期: 2018-09-25 整期出版日期: 2018-09-25

ZTFLH:

TH123.1

引用本文:

谭丽辉, 谭洪武. 不同截面形状薄壁构件斜向碰撞性能分析 [J]. 吉林化工学院学报, 2018, 35(9): 32-35.
TAN Li-hui, TAN Hong-wu. The Crashworthiness Analysis of different Cross-Section Thin-Walled Components . Journal of Jilin Institute of Chemical Technology, 2018, 35(9): 32-35.

链接本文:

http://xuebao.jlict.edu.cn/CN/10.16039/j.cnki.cn22-1249.2018.09.007 或 http://xuebao.jlict.edu.cn/CN/Y2018/V35/I9/32

[1]	WANG Ya-hong, JIA Ying-chao. Optimization for Soxhlet Extraction of Total Flavonoids from Eggplant Root by Using Response Surface Methodology[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 1 -6 .
[2]	PAN Hong-wei, ZHOU Hong-li. Research Progress on Extraction Technology and Component Analysis of Volatile Flavor Compounds in Plants[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 7 -10 .
[3]	ZHOU Zhen-qiang, WANG Kai-bao, CHEN Yu-tian, HAN Ji, HOU Dai-bing, GUO Wen-qi. Analysis of the Design and Dynamic Characteristics of Recyclable Garbage Crushing Device[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 31 -35 .
[4]	ZHU Qi-rui, ZHANG Yu-feng, LI Yang-xin, WU Dong-jun, BI Shuai-nan, ZHOU Rui-jie, YOU Sai-sai. The Structural Design and Parameter Analysis of the Chair Structure of Quadriplegia of Cerebral Palsy[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 40 -44 .
[5]	ZHANG Yun-peng. Preparation and Characterization of Er³⁺，Y³⁺，Yb³⁺ Co-doped Al₂O₃ Luminescence Materials[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 58 -63 .
[6]	MI Ya-wei. Proof of the Manifold of n Manifold[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 64 -66 .
[7]	XU You-zhuan, ZHOU Hou-qing. The Lower Bounds of Energy for Some Circulant Graph[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 67 -72 .
[8]	ZHOU Hong-li, ZHANG Yang, CUI Hao, XUE Jian-fei. Primary Exploration of the Applied Pharmaceutical Talents Training in Ordinary Engineering Colleges Based on Social Needs and R ecruitment Drives[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 1 -4 .
[9]	YANG Xiu-dong, WANG Ya-hong, ZHANG Pin-mei, YANG Yan-jun, CUI Hao, ZHOU Hong-li. Discussion on the Practice Teaching Reform of Pharmaceutical Engineering Based on Engineering Education Professional Accreditation[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 5 -7 .
[10]	LI Long, WANG Xue-mei. Research on Higher Education Assessment Mode Based on Formative Evaluation and Information Entropy Theory[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(2): 8 -12 .