压电泵在喷墨打印机连供系统上应用研究

doi:10.16039/j.cnki.cn22-1249.2018.03.004

下载:

PDF (264KB)
输出: BibTeX | EndNote (RIS)

摘要为解决带有连供系统的喷墨打印机内置墨盒中的墨水向外置墨盒回流及打印机长期不用墨水干
燥阻塞管路问题，将微型有阀压电泵安装在连供系统的管路中，并对压电泵进行了性能测试．测试结果
显示: 在连供装置的管路中压电泵最大输出流量可达 8 mL /min－1，最大输出压力可达 11 kPa; 压电泵出
口反向截止压力为 65 cmH2O，最小自吸高度可达 70 cmH2O．以上测试数据结果表明，所设计的压电泵结
构尺寸小，性能好，安装后可完全解决连供系统存在的问题．

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	孙晓锋
	于文鑫
	祝明威
	接勐
	姜德龙

关键词: 压电泵喷墨打印机连续供墨

Abstract: In order to solve the problems of backflow ink in inner cartridges to external cartridges and ink
drying blocked pipeline if never used in the inkjet printer with continuous ink supply system， the micro
piezoelectric pump with valve installed in the pipeline for the system， and performance of the piezoelectric
pump were tested．The test results showed that: maximum output flow rate of the piezoelectric pump up to 8
mL /min－1 in the continuous ink pipeline for device， the maximum output pressure can reach 1． 1 kPa;
piezoelectric pump reverse cut-off pressure is 65 cmH2O， the minimum self-priming height can reach 70
cmH
2O．The above test results show that the piezoelectric pump has structure design of small size， good
performance，the problems of continuous ink supply system can be completely solved after installation．

Key words: piezoelectric pump inkjet printer continuous ink

出版日期: 2018-03-25 发布日期: 2018-03-25 整期出版日期: 2018-03-25

ZTFLH:	S 277.9
	TH 138

引用本文:

孙晓锋, 于文鑫, 祝明威, 接勐, 姜德龙. 压电泵在喷墨打印机连供系统上应用研究[J]. 吉林化工学院学报, 2018, 35(3): 15-18.
SUN Xiao-feng, YU Wen-xin, ZHU Ming-wei, JIE Meng, JIANG De-lon. Research on the Piezoelectric Pump Application in Continuous Ink Supply System of the Inkjet Printer. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 15-18.

链接本文:

http://jlictxuebao.cn/CN/10.16039/j.cnki.cn22-1249.2018.03.004 或 http://jlictxuebao.cn/CN/Y2018/V35/I3/15

[1]	WANG Ya-hong, JIA Ying-chao. Optimization for Soxhlet Extraction of Total Flavonoids from Eggplant Root by Using Response Surface Methodology[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 1 -6 .
[2]	XU You-zhuan, ZHOU Hou-qing. The Lower Bounds of Energy for Some Circulant Graph[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 67 -72 .
[3]	PAN Hong-wei, ZHOU Hong-li. Research Progress on Extraction Technology and Component Analysis of Volatile Flavor Compounds in Plants[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 7 -10 .
[4]	YAN Zhen-han, CHEN Qing. Analysis of Pressure Sealing Technology Research[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 11 -14 .
[5]	LV Xue-fei, LIU Shuang, GAN Shu-kun. New Technology of Compound Rare Earth Salt Conversion on Copper Alloy Surface[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 19 -22 .
[6]	SONG Qi, LIU Peng, CHEN X, LIU Tong. Mechanical Structure Design of the Chocolate 3D Printer[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 23 -26 .
[7]	HAN Jie, WANG Kai-bao, ZHOU Zhen-qiang, LIU Yu-li, SONG Chun-lei, QIN Qing-kun. Design and Modal Analysis of Ozone Disinfection Cleaning Machine for Fruits and Vegetables[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 27 -30 .
[8]	ZHOU Zhen-qiang, WANG Kai-bao, CHEN Yu-tian, HAN Ji, HOU Dai-bing, GUO Wen-qi. Analysis of the Design and Dynamic Characteristics of Recyclable Garbage Crushing Device[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 31 -35 .
[9]	LIU Hong-bo, LIU Qi. Experimental Study on Pneumatic Space Bending Flexible Joint[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 36 -39 .
[10]	ZHU Qi-rui, ZHANG Yu-feng, LI Yang-xin, WU Dong-jun, BI Shuai-nan, ZHOU Rui-jie, YOU Sai-sai. The Structural Design and Parameter Analysis of the Chair Structure of Quadriplegia of Cerebral Palsy[J]. Journal of Jilin Institute of Chemical Technology, 2018, 35(3): 40 -44 .